The ADAM-5510E/TCP is an Ethernet-connected,
PC-based, programmable controller with the same CPU design as the ADAM-5510M.
The ADAM-5510E/TCP supports Ethernet interfaces and has eight slots for I/O
module installation. The Ethernet connection and I/O capacity are the main
advantages of this product.
Operates on 24V DC Power-See Accessories
Product Data SheetPC-based Programmable Controller System
- CPU 16-bit microprocessor
- Memory 1.5 MB flash memory: - 256 KB
system Disk - 256 KB flash memory - 1024 KB file system, 960 KB for user
applications 640 KB SRAM, up to 384 KB with battery backup
- Operating System ROM-DOS (MS-DOS 6.22
Compatible)
- Real-time Clock Yes
- Watchdog Timer Yes
- COM1 RS-232/485 for ADAM-5510E RS-232 for
ADAM-5510M
- COM2 RS-485
- Programming TX, RX, GND (RS-232 Interface)
Port/COM3
- COM4 RS-232/485
- I/O Capacity 8 Slots for ADAM-5510E 4
slots for ADAM-5510M
- Status Display Power, CPU, communication
and battery
- CPU Power 1.0 W Consumption
Isolation
- Power Input 3000 VDC
- Communication 2500 VDC (COM2 only)
Network
- Medium RS-485 (2-wire)
- Speeds (bps) 1200 up to 115.2 k
- Maximum Nodes Up to 256 multi-drop system
per serial port
Software Support
- C Library Borland C++ 3.0 for DOS
Power
- Unregulated + 10 to + 30 VDC
- Protected against Power Reversal
Mechanical
- Case KJW with captive mounting hardware
- Plug-in Screw Accepts 0.5 mm2 to 2.5 mm2,
1 - #12 or 2 - #14 to Terminal Block #22 AWG
Environment
- Operating Temperature - 10 ~ 70ø C (14 ~
158ø F)
- Storage Temperature - 25 ~ 85ø C (-13 ~
185ø F)
- Humidity 5 ~ 95%, non-condensing
