Advantech ADAM-6500 Series Model 6541-A Ethernet Networking Module

The ADAM-6541 is industrial grade converters which are designed to convert Ethernet network (10/100Base-TX) to fiber network (100Base-FX). It transparently converts Ethernet signals into optic signals. The advantages of fiber optics are wide bandwidth, anti-EMI and suitable for long-distance transmission. Therefore, the ADAM-6541 are ideal solutions for ?fiber to building? application at central offices or local sites.

Main Features

• Supports 1-port 100 Mbps multimode fiber optics
• Supports 10 ~30 VDC power input
• Easily mounted on a DIN-rail, panel or piggyback
• Supports full/half-duplex flow control
• Supports MDI/MDIX auto crossover
• Embedded with a switch controller, supports auto-negotiation
• Embedded with memory buffer, supports store and forward transmission

Interface 10/100Base-TX & 100Base-FX standard

Port 1 x 10/100 Mbps (RJ-45), 1 x 100 Mbps (Fiber)

Connector 1 x RJ-45 & 1 x Fiber (SC type)

Compatibility IEEE 802.3, IEEE 802.3u

Surge Protection 3,000 VDC (Power)

Isolation (Ethernet port) 1,500 VRMS

LED Power, LNK/ACT, 10/100 Mbps

Transmission Distance 100 m (Ethernet)

Communication 50/125, 62.5/125 or Distance 100/140 æm multi mode (Multi mode fiber) fiber, 412 m for half duplex, 2 km for full duplex.

Power Requirement Unregulated 10 ~ 30 VDC

Power Consumption 3 W

Case ABS/PC with captive mounting hardware.

Mounting DIN-rail, panel mounting, piggyback stack

Operating Temperature -10 ~ 70ø C

Storage Temperature -20 ~ 80ø C

Operating Humidity 20 ~ 95% (non-condensing)

Storage Humidity 0 ~ 95% (non-condensing)