Advantech ADAM-6500 Series Model 6542/W15-A WDM Fiber Optic Converter

The ADAM-6542 adopts WDM technology that increases the information carrying capacity of fiber via multiplex transmit and receive signals at different wavelengths on the single strand cable. The WDM technology is implemented in couples. One site is installed ADAM-6542/W15 which transmit channel is 1550nm and receive channel is 1310nm. The other site is installed ADAM6542/W13 which transmit channel is 1310nm and receive channel is 1550nm. Both transmit and receive channels of

ADAM-6542/W15 and ADAM-6542/W13 are multiplexed to a single strand cable. You can save half cabling cost when you use ADAM-6542/W15 and ADAM-6542/W13 instead of your original dual fiber converter.

Main Features

• Supports 1-port 100 Mbps single strand fiber optics
• Supports 10 ~30 VDC power input
• Easily to mounted on a DIN-rail, panel or piggyback
• Provides 100Base-FX WDM single strand fiber
• Supports MDI/MDIX auto crossover
• Embedded with a switch controller, supports auto-negotiation
• Embedded with the memory buffer, supports store and forward transmission

Operates on 24V DC Power-See Accessories

    Product Data Sheet

Interface 10/100Base-TX & 100Base-FX standard

Port 1 x 10/100 Mbps (RJ-45), 1 x 100 Mbps (Fiber)

Connector 1 x RJ-45 & 1 x Fiber (SC type)

Compatibility IEEE 802.3, IEEE 802.3u

Surge Protection 3,000 VDC (Power)

Isolation (Ethernet port) 1,500 VRMS

LED Power, LNK/ACT, 10/100 Mbps

Transmission Distance 100 m (Ethernet)

Communication 8.3/125, 8.7/125, 9/125 Distance or 10/125 æm single (Single mode fiber) mode fiber, 20 km for WDM (Wavelength Division Multiplexing)

Power Requirement Unregulated 10 ~ 30 VDC

Power Consumption 3 W

Case ABS/PC with captive mounting hardware.

Mounting DIN-rail, panel mounting, piggyback stack

Operating Temperature -10 ~ 70ø C

Storage Temperature -20 ~ 80ø C

Operating Humidity 20 ~ 95% (non-condensing)

Storage Humidity 0 ~ 95% (non-consending)