Sato M-10e Wide Industrial Thermal Label Printer 305 dpi

M-10e
SATO’s new M-10e was designed with manufacturing applications in mind. It can handle labels up to a full 11.8 inches wide at a speed of up to 5 inches per second.

The 10.5 inch printhead makes it possible to print large format compliance labels at top speed without rotating the image. The M-10e printer can hold media sizes up to approximately 11.8 inches wide x 16.6 inches long. For maximum throughput, a 32-Bit high-speed RISC processor is at the heart of every M-10e printer.

The M-10e was designed for the following applications:
AIAG Parts Labeling
Pallet Labeling
ODETTE Parts Labeling
Chemical Drum Labeling
JAMA Parts Labeling
Shipping & Receiving

Features:
    305 dpi
    5 ips maximum print speed
    10.5" maximum print width
    16.5" maximum print length

Standard high-speed, bi-directional Plug-In Interface Modules are available for:
    IEEE 1284 Bi-Directional Parallel
    Universal Serial Bus (USB)
    High-Speed Serial (57.6k bps)

Optional Plug-In Interface Modules are available for:
    Ethernet-10/100BaseT (incl. WPC Plus)
    Wireless 802.11b
    RS422/485 Serial
    Twinax/Coax
 

• 10.5" Wide Print Area
• 305 dpi Resolution
• Fast Processing Speed
• Heavy-Duty Industrial Construction
• 22 MB Standard Memory
• Windows® Driver

SATO's new M10e was started with manufacturing applications in mind. It can create labels up to a full 10.5 inches wide at a speed of up to 5 inches per second. The 10.5-Inch printhead makes it possible to print large format compliance labels at top speed without rotating the image. The M10e printer can hold media sizes up to approximately 10.5" wide x 16.5" long.

For maximum throughput, a 32-Bit high-speed RISC processor is the heart of every M10e printer.

Designed for the following applications:

• AIAG Parts Labeling
• Pallet Labeling
• Chemical Drum Labeling
• Shipping & Receiving
• ODETTE Parts Labeling
• JAMA Parts Labeling

Memory:
16 MB Std. Memory with RAM storage for special characters
6 MB Flash Memory

Plug-In Interface Modules:
Standard Interface Modules:

• Serial - RS232 (up to 57.6k bps)
• Parallel - IEEE1284 (ECP)

Optional Interfaces Modules:

• Ethernet - 10/100BaseT
• Twinax/Coax

Processor:
32-BIT RISC/133 Mhz

Media:
Roll or fan-fold die cut labels
Max. 0.008" (0.21mm) Caliper
Max 3" (76.2mm) Inner Diameter
Max 7.8" (200mm) Roll Diameter
Wind Face-In

Barcode Symbologies:
Elementary: UPC-A/E, EAN-8/13, Code 39/93/128, Bookland, Industrial 2/5, Interleaved 2/5, Matrix 2/5, Postnet, UCC/EAN 128
2-Dimensional: PDF417, Maxicode, Data Matrix, QR Code

Barcode:
2:1, 3:1, 5:2 ratio; programmable height up to 999 dots

Human Readable Fonts:
12 proportional, mono-spaced and outline fonts (Code table 858) Internal CG Triumvirate® & CG Times® fonts plus downloaded TrueType® fonts

Self Diagnosis Check Features:
Head, Paper-End, Ribbon-Near-End, Ribbon End, Head Open, Memory Card Error, Test Print, Cutter Cover Open

Other Features:
Status Report, Graphics, Sequence, Form Overlay Store, Custom Design Character, Reverse Image, Line Print, Hex Dump Print, Format Store, Paper Auto Loading

Power:
AC 100-240V, auto switching/
Peak 560VA,560W

Options:
Cutter, Real Time Clock, Stacker, Unwind