Live Chat Software
L-TronDirect is under construction! Some prices may be inaccurate. Please call for pricing. 800-830-9523 X2

Ethernet-based Dual-loop PID Controller (ADAM-6022-A1E)

by Advantech

Part #: ADAM-6022-A1E


View Detailed Description

$430.00

Call for Availability

Advantech’s ADAM-6022 is an Ethernet-enabled dual-loop PID controller for general purposed PID control applications. A user-friendly utility software is included for users to set PID parameters (Pv, Mv, & Sv). Through the integrated web page, users can monitor and change the control set point through the Internet via web browser. The ADAM-6022 also supports MODBUS/TCP protocol. HMI software can easily access this module to monitor the I/O data and change the control parameters.

  • 2 loop PID control algorithms built in one package
  • 3 analog input/1 analog output/1 digital input/1 digital alarm output for 1 PID loop
  • Support multiple analog I/O ranges: 0 ~ 10 VDC, 0 ~ 20 mA and 4 ~ 20 mA
  • Support heating/cooling (direct/reverse) action mode
  • Support loop open/close (PID disable/enable) and analog output manual control modes
  • Built-in watchdog timer
Analog InputChannel Independent ConfigurationYes
Sampling Rates10 samples/second
Resolution 16-bit
Channels6 differential
Voltage Range±10 V
Current Input0~20 mA 4~20 mA
Input Impedance20 MOhm
Span Drift±25 ppm/°C
Zero Drift±6 µV/°C
Analog OutputChannels2
Voltage Range0~10 V
Current Output0~20 mA 4~20 mA
Digital InputInput VoltageDry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Channels2
Digital OutputChannels2, open collector to 30V, 100 mA max. load
Power Dissipation300 mW for each module
DisplayLED IndicatorsStatus, Comm, Link, Speed
GeneralWatchdog TimerSystem (1.6 second) & Communication (programmable)
Temperature (Operating)-10~70 °C (14~158 °F)
Humidity20~95 %RH
Temperature (Storage)-20~80 °C (-4~176 °F)
Interface10/100Base-T(X)
Peer-to-PeerNo
GCLNo
Isolation Protection2000 VDC
Communication ProtocolModbus/TCP, TCP/IP, UDP, and HTTP
Communication SpeedEthernet: 10/100Mbps
Comm. DistanceEthernet: 100 m
Connector1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
Power SupplyPower Requirement10~30 VDC

Be the first to review this product!

Write a review

Note: HTML is not translated!
0 1 2 3 4 5